This setting defines the amount of ease. The higher the number, the more ease is added to the body measurements.
The flair amount will be added 30cm below the hip, not at the skirt hem.
For this option, the following settings are recommanded:
Do you want to apply these settings?
High sleeve head: small fit at upper arm. For stretchy fabric like jersey only. Medium high sleeve head: looser fit. For jersey, thicker knits or sweat. Flat sleeve head: wide fit. All sort of fabrics.
The sleeve head is spread by this amount. This will lead to a larger sleeve head scope, which will need to be gathered to fit into the armscye.
The sleeve is drawn wider as the cuff by this amount. The cuff needs to be stretched while sewing.
Amount the shoulder width should be shortened. The shoulder point is moved to the inside. Please note: This amount might get reduced if this would result in a shoulder smaller than 5cm!
The value defines the depth of the armhole. Increasing this value will increase the width of the upper sleeve and also the bust width. Smaller values may increase movement.
Want some more poof above the cuff? You can also set this option and add some elastic to the wrist.
Distance between neck and neckline on one side, without neckband.
Distance between neck and neckline on the front, without neckband.
Distance between neck and neckline on the back, without neckband.
Length of neckband will be decreased by this factor.
Select a clothing size or upload a measure set. You can create a measure set with your own measurements.
Sizing table