Jackets

Pin it

The pattern is relatively simple, with no seam allowances, is lined, and offers several collar options plus a hood. You can choose between a zipper and buttons for the closure.

This sewing pattern is optimized for woven fabrics without stretch.

The bust dart in this pattern is optional. Please use the option “no bust dart” for a really small bust only.

Instruction video

This sewing pattern is free for your personal use. Please note that commercial use is not allowed.

Basic form

The model length cannot be shorter that hip level.

You might want to change this option if you want to put in a zipper of a certain length. Remember that the length cannot be shorter than hip level. Tip: add about 2 cm to zipper length to have a bit of wiggle room.

This setting defines the amount of ease. The higher the number, the more ease is added to the body measurements.

Fit category Bust scope Waist scope Hip scope
1 + 1 cm + 1 cm + 1 cm
2 + 4 cm + 3 cm + 2 cm
3 + 6 cm + 6 cm + 6 cm
4 + 8 cm + 7 cm + 6 cm
5 + 10 cm + 10 cm + 7 cm
6 + 12 cm + 12 cm + 8 cm
7 + 14 cm + 14 cm + 10 cm
8 + 16 cm + 16 cm + 12 cm
9 + 18 cm + 18 cm + 16 cm
10 + 20 cm + 20 cm + 20 cm

Closure

Neckline finnish

Distance between neck and neckline on one side, without neckband.

Distance between neck and neckline on the front, without neckband.

Distance between neck and neckline on the back, without neckband.

Pockets

Sleeve

For this option, the following settings are recommanded:

Wrist scope addition 10 cm
Sleeve length extension 0 cm

Do you want to apply these settings?

For this option, the following settings are recommanded:

Wrist scope addition 6 cm
Addition to sleeve at cuff 10 cm
Sleeve length extension 2 cm

Do you want to apply these settings?

High sleeve head: small fit at upper arm. For stretchy fabric like jersey only.
Medium high sleeve head: looser fit. For jersey, thicker knits or sweat.
Flat sleeve head: wide fit. All sort of fabrics.

The sleeve head is spread by this amount. This will lead to a larger sleeve head scope, which will need to be gathered to fit into the armscye.

The sleeve is drawn wider as the cuff by this amount. The cuff needs to be stretched while sewing.

The value defines the depth of the armhole. Increasing this value will increase the width of the upper sleeve and also the bust width. Smaller values may increase movement.

Want some more poof above the cuff? You can also set this option and add some elastic to the wrist.

Select size/Upload measure set

Select a clothing size or upload a measure set.
You can create a measure set with your own measurements.

Sizing table

Reset measure
Seamallowance and paper formats